Bmw 650i Convertible 2007 Bedienungsanleitung PDF herunterladen (Seite 114)

Practical interior accessories

112

Practical interior accessories

Integrated universal remote

control*

The concept

The integrated universal remote control can

replace as many as three hand-held transmit-

ters for various remote-controlled accessories,

such as garage and gate or lighting systems.

The integrated universal remote control regis-

ters and stores signals from the original hand-

held transmitters.

The signal of an original hand-held transmitter

can be programmed on one of the three mem-

ory buttons 1. After this, the programmed

memory button 1 will operate the system in

question. The LED 2 flashes to confirm trans-

mission of the signal.

If you sell your vehicle one day, delete the saved

programs beforehand for your own security,

refer to page 113.

To prevent possible damage or injury,

before programming or using the inte-

grated universal remote control, always inspect

the immediate area to make certain that no peo-

ple, animals or objects are within the travel

range of the device. Also, comply with the

safety precautions of the original hand-held

transmitter.<

Checking compatibility

If you see this symbol on the packaging

or in the manual supplied with the orig-

inal hand-held transmitter, it is safe to

assume that it is compatible with the integrated

universal remote control.

If you have additional questions, please

contact your BMW center or call:

1-800-355-3515.

Information is also provided on the Internet at:

www.bmwusa.com or

www.homelink.com.

HomeLink is a registered trademark of

Johnson Controls, Inc.<

Programming

1 Memory buttons

2 LED

Fixed-code hand-held transmitters

1. Switch on ignition, refer to page 59.

2. When using for the first time: press the left

and right-hand memory button 1 for approx.

20 seconds until the LED 2 flashes quickly.

All stored programs are deleted.

3. Hold the original hand-held transmitter at a

distance of approx. 4 in/10 cm to 12 in/

30 cm from the memory buttons 1.

The required distance between the

hand-held transmitter and the mem-

ory buttons 1 depends on the particular

system of the original hand-held transmitter

used.<

4. Simultaneously press the transmit key on

the original hand-held transmitter and the

desired memory button 1 on the integrated

universal remote control. The LED 2 flashes

slowly at first. As soon as the LED 2 flashes

rapidly, release both buttons. If the LED 2

does not flash rapidly after approx. 15 sec-

onds, alter the distance and repeat the step.

5. To program other original hand-held trans-

mitters, repeat steps 3 and 4.

The corresponding memory button 1 is now

programmed with the signal of the original

hand-held transmitter.

You can operate the device when the engine is

running or when the ignition is switched on.

Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare