BMW 640i Bedienungshandbuch PDF herunterladen (Seite 85)

If the shift paddles on the steering wheel are

used to shift gears in automatic mode, the

transmission temporarily switches to manual

mode.

In the manual mode, after conservative driving

for a certain amount of time or if there has

been no acceleration or shifting of the shift

paddles within a certain amount of time, the

transmission switches back to automatic

mode.

Displays in the instrument cluster

The selector lever position is dis‐

played, e.g.: P.

Electronic unlocking of the

transmission lock

General information

Electronically unlock the transmission lock to

maneuver vehicle from the danger area.

Unlocking is possible, if the started can spin

the engine.

Engaging selector lever position N

1.

Depress the brake pedal.

2. Press the Start/Stop button. The starter

must audibly start.

3. Press and hold the selector lever into posi‐

tion N.

A corresponding Check Control message

is displayed.

4. Press the selector lever again into posi‐

tion N within approx. 6 seconds.

Position N is displayed in the instrument

cluster.

5. Release brake, as soon as the starter

stops.

6. Maneuver the vehicle from the danger area

and secure it against moving on its own.

Steptronic Sport transmission:

Launch Control

The concept

Launch Control enables optimum acceleration

on surfaces with good traction.

Hints

Component wear

Do not use Launch Control too often;

otherwise, this may result in premature wear of

components due to the high stress placed on

the vehicle.◀

Do not use Launch Control during the break-in,

refer to page 180, period.

To increase vehicle stability, activate DSC

again as soon as possible.

An experienced driver may be able to achieve

better acceleration values in DSC OFF mode.

Requirements

Launch Control is available when the engine is

warmed up, that is, after uninterrupted driving

of at least 6 miles/10 km.

To start with Launch Control do not steer the

steering wheel.

Start with launch control

While the engine is running:

1. Press button or select Sport+ with

the Driving Dynamics Control.

TRACTION is displayed in the instrument

cluster and the indicator lamp for DSC OFF

lights up.

2. Engage selector lever position S.

3. With the left foot, forcefully press down on

the brake.

4. Press and hold down the accelerator pedal

beyond the resistance point at the full

throttle position.

Seite 81

Driving Controls

81

Online Edition for Part no. 01 40 2 954 418 - II/15

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 258 259

Kommentare zu diesen Handbüchern

Keine Kommentare