BMW 428i Bedienungshandbuch PDF herunterladen (Seite 216)

row 1 and the inner part onto the centering

component, arrow 2. Make sure that the

tail lamp engages in the rubber mount.

4. Screw the tail lamp on with the two nuts.

5. Mount the cover.

Lights in the trunk lid

General information

Follow general instructions, refer to page 207.

Reversing lights: 16-watt bulb, PW16W.

Inner brake lights: 21-watt bulb, H21W

Accessing the lights

Use the screwdriver from the onboard ve‐

hicle tool kit to loosen and completely re‐

move the two screws on the cover, arrow.

2. Remove the released cover.

Replacing the reversing lamp and inner

brake lamp

1. Loosen the bottom holder, arrow 1.

2. Loosen the top holder, arrow 2. To do so,

press in the middle latch and then press

out both outside latches.

Remove the lamp holder, arrow 3.

3. Unscrew the defective bulb of the revers‐

ing or brake lamp from its socket counter‐

clockwise.

4. Insert the new bulb.

Installing the bulb holder

Insert the two contacts, arrow 1, into the

connections, arrow 2.

2. Press on the bulb holder, arrow 3. Make

sure that the two exterior holders latch into

place.

3. Reattach the two covers to the trunk lid.

Rear lamp, license plate lamp and

central brake lamp

Follow general instructions, refer to page 207.

Seite 212

Mobility Replacing components

212

Online Edition for Part no. 01 40 2 960 547 - II/15

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 246 247

Keine Kommentare

BMW 428i Bedienungshandbuch Seite 216