BMW 2015 i3 Bedienungshandbuch PDF herunterladen (Seite 182)

3. "AC charging power:"

Settings are stored. When you change charg‐

ing locations you also might need to change

the setting for charging.

Set the charge current strength at other

household sockets to "Low".

Setting charging via a

Level 2 charging cable

Depending on the electrical mains, the vehicle

must be charged with a different charging cur‐

rent strength, refer to page 160.

When charging with a Level 2 charging cable,

the charging process can be completed faster

at a Level 2 charging station.

1.

"Settings"

2. "Charging"

3. "Level 2:"

Settings are stored. When you change charg‐

ing locations you also might need to change

the setting for charging.

Stopping charging process

The charging operation can be stopped at any

time by removing the charging cable and con‐

tinued at a later time by connecting the charg‐

ing cable in order to use other loads on the

power connection or to prevent simultaneous

high power from multiple loads.

The charging operation is interrupted when the

vehicle is unlocked and automatically resumed

after a brief time or when it is locked.

Continue charging operation

If the charging operation is interrupted, e.g.,

through a temporary power failure, the charg‐

ing operation is automatically continued after

the interruption.

Terminating charging process

1. Removing the charging cable from the ve‐

hicle, refer to page 163.

2. Stow the charging cable as required.

3. Close the charging port flap.

4. Lock vehicle if it is unlocked.

Displays in the instrument

cluster

The charging state indicator light, refer to

page 77, shows the charging state of the high-

voltage battery in the instrument cluster, if op‐

erating readiness is switched on. If all seg‐

ments are filled, the high-voltage battery is

fully charged.

Even if no segments are filled, the high-voltage

system is still under high voltage.

Information regarding the charging process are

shown on the charging screen, refer to

page 76.

Display Meaning

Blue plug: charging process active

or completed.

White plug: charging interruption.

Running light: animated with active

charging operation.

End of charging time or set depar‐

ture time.

Charging progress bar.

Running light: animated with active

charging operation.

DC charging active on a DC charg‐

ing station.

Indicator in blue: charged electrical

range.

Seite 166

Mobility Charging vehicle

166

Online Edition for Part no. 01 40 2 960 865 - II/15

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 235 236

Kommentare zu diesen Handbüchern

Keine Kommentare