BMW 2009 650 Bedienungshandbuch PDF herunterladen (Seite 85)

Controls

83

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

Displaying the urgency of malfunctions

Depending on the equipment, the stored Check

Control messages are also displayed with the

following symbols:

No malfunctions detected in the moni-

tored systems.

Malfunctions are present in the moni-

tored systems. Depending on the mal-

function, supplementary information is

shown on the Control Display.

The symbols also indicate the status of the ser-

vice requirements display, refer to page 79.

Displays after completion of trip

Malfunction reports generated during the trip

are shown consecutively when you switch off

the ignition.

Before the display disappears, you can display

the messages once again. Press the CHECK

button for approx. 2 seconds. If several mes-

sages are present, you can continue to press

the CHECK button to view them in succession.

The display goes out:

> after a short time

> when you press the CHECK button again

for approx. 2 seconds

Speed limit

You can enter a speed and a Check Control

message indicates when you have reached this

speed. This enables you, for example, to

receive warnings if you exceed a speed limit in

an urban area.

You are only warned of reaching this speed a

second time if your vehicle speed falls below it

again by at least 3 mph/5 km/h.

Displaying, setting or changing limit

iDrive, for operating principle refer to page 16.

1. Open the start menu.

2. Open "Navigation".

Without navigation system

*: Open "Car

Data".

3. Select "Car Data" and press the controller.

4. Select "Limit" and press the controller.

5. Select the speed value and press the con-

troller.

6. Turn the controller to set the limit.

7. Press the controller to apply the setting.

The limit is activated.

Applying your current speed as limit

Select "Select current speed" and press the

controller. The system adopts your current

speed as the limit.

Activating/deactivating limit

Select "On" and press the controller.

The limit is activated.

Stopwatch

iDrive, for operating principle refer to page 16.

1. Open the start menu.

2. Open "Navigation".

Without navigation system

*: Open "Car

Data".

3. Select "Car Data" and press the controller.

Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 271 272

Kommentare zu diesen Handbüchern

Keine Kommentare