BMW 2008 M3 Bedienungshandbuch PDF herunterladen (Seite 55)

Reference At a glanceControlsDriving tipsMobility

53

1. As the vehicle approaches its maximum

engine speed, the yellow LEDs 1 light up

consecutively to indicate the impending

shift point.

2. At the latest, shift when the red LEDs 2 light

up.

The LEDs flash when the maximum allowable

engine speed is reached. When the maximum

engine speed is exceeded, the fuel supply is cut

off to protect the engine. Avoid engine speeds

in this range at all costs.

Switching the Shift Lights on/off

For operating principle, refer to page 61.

1. Switch on the ignition, refer to page 46.

2. Lightly push button 1 in the turn indicator

lever up or down repeatedly until the sym-

bol appears in the display accompanied by

the word "SET".

3. Press button 2.

4. Use button 1 to select:

>

Shift Lights activated.

>

Shift Lights deactivated.

5. Press button 2.

The setting is stored for the remote control cur-

rently in use.

Brightness of Shift Lights

The brightness of the Shift Lights can be set

using the brightness level of the instrument

cluster, refer to Instrument lighting on page 78.

Launch Control

Launch Control enables you to drive off with an

optimal vehicle acceleration on a high grip road

surface.

Do not use Launch Control too often, as

the higher loads on the vehicle lead to

premature component wear.<

Launch Control is available when the engine is

at operating temperature, i.e. after driving con-

tinuously for at least 6 miles/10 km.

Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 171 172

Kommentare zu diesen Handbüchern

Keine Kommentare