BMW 2008 3 Series Bedienungshandbuch PDF herunterladen (Seite 109)

Controls

107

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

> Left-hand LED on, AUC mode: a sensor

detects pollutants in the outside air. If nec-

essary, the system blocks the supply of out-

side air and recirculates the inside air. As

soon as the concentration of pollutants in

the outside air has decreased sufficiently,

the system automatically switches back to

outside air supply.

> Right-hand LED on, recirculated-air mode:

the supply of outside air is permanently

shut off. The system then recirculates the

air currently within the vehicle.

If condensation starts to form on the

inside window surfaces during operation

in the recirculated-air mode, you should switch

it off while also increasing the air flow rate as

required.

The recirculated-air mode should not be used

over an extended period of time, otherwise the

air quality inside the car will deteriorate contin-

uously.<

Via the button* on the steering wheel

You can switch quickly between the recircu-

lated-air mode and the previous mode using an

individually programmable button

on the steer-

ing wheel, refer to page 11.

Residual heat

The heat stored in the engine is

used to heat the passenger com-

partment, e.g. while stopped at a

school to pick up a child.

The function can be switched on when the fol-

lowing conditions are met:

> Up to 15 minutes after the engine has been

switched off

> While the engine is at operating tempera-

ture

> As long as battery voltage is sufficient

> At an outside temperature below 77 7/

25 6

The LED is lit when the function is on.

As of radio readiness, you can set the interior

temperature, the air flow rate and the air distri-

bution.

Defrosting windows and removing

condensation

Quickly removes ice and conden-

sation from the windshield and

front side windows.

Switch on the cooling function as well.

Switching cooling function on/off

The cooling function cools and

dehumidifies the incoming air

before reheating it as required,

according to the temperature setting. This

function is only available while the engine is

running.

The cooling function helps prevent condensa-

tion on the windows or removes it quickly.

Depending on the weather, the windshield may

fog over briefly when the engine is started.

The cooling function is automatically switched

on along with the AUTO program.

Rear window defroster

The defroster is switched off auto-

matically after a certain time.

Depending on your vehicle's

equipment, the upper wires serve as an antenna

and are not part of the rear window defroster.

Ventilation

1 Use the knurled wheels to smoothly open

and close the air vents

2 Use the lever to change the direction of the

airflow

3 Knurled wheel for more or less cool air from

the vents for the upper body area

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 271 272

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 2008 3 Series Bedienungshandbuch Seite 109

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW 2008 3 Series