BMW 2008 3 Series Bedienungshandbuch PDF herunterladen (Seite 68)

Driving

Cruise control*

The concept

Cruise control is available for use at speeds of

approx. 20 mph or 30 km/h. The car then stores

and maintains the speed that you specify using

the lever on the steering column. In order to

maintain the specified speed, the system

brakes the vehicle when the engine braking

effect is insufficient on downhill gradients.

Do not use cruise control when driving at

constant speed is prevented by adverse

conditions, e.g. winding roads, dense traffic or

poor road conditions due to, e.g., snow, rain, ice

or loose surfaces. Otherwise you could lose

control of the vehicle and cause an accident as a

result.<

Manual transmission

You can shift gears while cruise control is acti-

vated. An indicator lamp notifies you that you

should shift gears when you drive for an

extended period at very high or very low engine

speeds, or the system is deactivated.

One lever for all functions

1 Storing and maintaining speed or accelerat-

ing

2 Storing and maintaining speed or deceler-

ating

3 Deactivating cruise control

4 Resuming a speed stored beforehand

Maintaining current speed

Tap the lever, arrow 1, or pull it briefly, arrow 2.

The car's current speed is stored and main-

tained. It is displayed on the speedometer and

briefly in the instrument cluster.

On uphill gradients, it may prove impossible to

maintain the set speed if current engine power

output is insufficient. If the engine braking

effect is insufficient on downhill slopes, the sys-

tem will brake the vehicle slightly.

Increasing desired speed

Repeatedly press the lever to the resistance

point or beyond, arrow 1, until the desired

speed is reached.

> Each time the lever is pressed to the resis-

tance point, the desired speed is increased

by approx. 1 mph or 1 km/h.

> Each time the lever is pressed beyond the

resistance point, the desired speed is

increased by up to 5 mph or 10 km/h.

The system stores and maintains the speed.

Accelerating using the lever

Accelerating slightly:

Press the lever to the resistance point, arrow 1,

until the desired speed is reached.

Accelerating significantly:

Press the lever beyond the resistance point,

arrow 1, until the desired speed is reached.

The vehicle accelerates without pressure on

the accelerator pedal. The system stores and

maintains the speed.

Decreasing speed

Repeatedly pull the lever to the resistance point

or beyond, arrow 2, until the desired speed is

displayed.

> Each time the lever is pulled to the resis-

tance point, the desired speed is decreased

by approx. 1 mph or 1 km/h.

> Each time the lever is pulled beyond the

resistance point, the desired speed is

reduced by up to 5 mph or 10 km/h until the

minimum speed of 20 mph or 30 km/h is

achieved.

The system stores and maintains the speed.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 271 272

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 2008 3 Series Bedienungshandbuch Seite 68

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW 2008 3 Series