BMW 2007 6 Series Bedienungshandbuch PDF herunterladen (Seite 64)

Driving

62

> Automatic downshifting and prevention of

incorrect shifting even in sequential opera-

tion

> Acceleration assistant, refer to page 65

Selector lever positions

> R: Reverse gear

> N: Neutral, idle

> One-touch functions for Sequential mode:

+: manual upshifting

–: manual downshifting

> D: activate/deactivate the Drive mode

The transmission automatically shifts

into N if the driver's door is opened with

the engine running and neither the pedals, the

shift paddles nor the selector lever are oper-

ated.

This is signaled by an acoustic signal and the

flashing display N in the instrument cluster; a

message appears on the Control Display.<

Gear display

R N 1 to 6

The currently engaged gear is displayed pre-

ceded by a D in Drive mode.

This display is your only way to be sure

the desired selector lever position is actu-

ally engaged.<

Shiftlock

Press the brake pedal before shifting out of N;

the shift command will not be executed unless

the brake is applied.

R Reverse

Select only when the vehicle is stationary.

Sequential mode

After every engine start, as soon as the selector

lever is pushed to the right and the brake pedal

is pressed, the Sequential mode is activated.

You can shift up and down using the shifting

paddles or the selector lever. You do not need

to remove your foot from the accelerator to do

so.

It is also possible to start off in second gear, e.g.

in slippery conditions.

In the following situations, SMG thinks for you:

> Upshifts and downshifts are executed only

when they will result in a plausible combina-

tion of engine and vehicle speed; thus, for

example, the system will not execute a

downshift that would cause the engine to

overrev.

> When the vehicle is stationary, the trans-

mission automatically downshifts into first

gear.

> Shortly before dropping below a gear-

dependent minimum speed, the transmis-

sion downshifts automatically even without

your intervention.

D Drive mode

In the Drive mode, all forward gears are shifted

automatically.

To switch from Sequential to Drive mode:

Briefly press the selector lever to the right

toward D.

Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare