BMW 2007 6 Series Bedienungshandbuch PDF herunterladen (Seite 52)

Adjusting

50

Seat, mirror and steering

wheel memory

You can store and select three different adjust-

ment settings for the driver's seat, exterior mir-

rors and steering wheel.

The adjustment of the lumbar support is not

stored in the memory.

Storing

1. Switch on radio readiness or ignition, refer

to page 59.

2. Adjust the desired seat, exterior mirror and

steering-wheel positions.

3. Press the button:

The LED in the button lights up.

4. Press the desired memory button 1, 2 or 3:

The LED goes out.

Requesting

Do not request a position from the mem-

ory while the vehicle is moving. There is a

risk of accident from unexpected movement of

the seat or steering wheel.<

Comfort mode

1. Open the driver's door after unlocking or

switch on radio readiness, refer to page 59.

2. Briefly press the desired memory button 1,

2 or 3.

The system cancels the adjustment procedure

when you briefly press one of the seat adjust-

ment switches or one of the memory buttons.

The adjusting procedure for the steering wheel

is interrupted if you briefly press the switch for

the steering wheel adjustment in any direction,

refer to page 55.

Safety feature

1. Close the driver's door and switch ignition

on or off, refer to page 59.

2. Press the desired memory button 1, 2 or 3

and maintain pressure until the adjustment

process has been completed.

If the button was pressed inadvertently:

press the button again; the LED goes out.

Activating with remote control

The last positions of the driver's seat, external

rearview mirrors, and steering wheel are stored

for the remote key currently in use.

You can choose when the position is requested:

> Request when unlocking vehicle

> Request when opening driver's door

When using this feature, always make

sure that the footwell behind the driver's

seat is empty and unobstructed. If you fail to do

so, any persons or objects behind the seat

could be injured or damaged by a rearward

movement of the seat.<

The system cancels the adjustment procedure

when you briefly press one of the seat adjust-

ment switches or one of the memory buttons.

iDrive, for explanation of principle, refer to

page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Settings" and press the controller.

4. Select "Vehicle / Tires" and press the con-

troller.

5. Change to upper field if necessary. Turn the

controller until "Door locks" is selected and

press the controller.

Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare