Bmw Motorrad K1300S Bedienungsanleitung PDF herunterladen (Seite 123)

Replace defective bulbs as

soon as possible; always carry a

complete set of spare bulbs if

possible.

The bulb is pressurized and

can cause injury if dam-

aged.

Wear eye and hand protection

when replacing bulbs.

An overview of the bulb

types installed in your mo-

torcycle is provided in the chap-

ter "Technical Data".

Do not touch the glass of

new bulbs with your fin-

gers. For installation, use a clean,

dry cloth. Dirt deposits, in par-

ticular oil and grease, interfere

with heat radiation from the bulb.

Overheating and therefore short

service life of the bulbs are the

consequence.

Replacing low-beam and

high-beam bulbs

The alignment of the con-

nector may differ from the

illustration depending on the bulb

to be replaced.

Make sure the ground is level

and firm and park the motorcy-

cle.

Switch off the ignition.

Remove the covers 1 on the

high-beam bulbs and/or the

cover 2 on the low-beam bulbs

by turning counterclockwise.

Disconnect plug 3.

Remove spring strap 4 from

detents and fold up.

Remove bulb 5.

119

Maintenance

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 169 170

Keine Kommentare

Bmw Motorrad K1300S Bedienungsanleitung Seite 123