BMW K 1200 R - Wartungshandbuch PDF herunterladen (Seite 103)

1 Extending tool holder

Adapters to accommodate all

tools

Removing and installing spark

plugs

2 1/4" bits

5x Torx, for example for remov-

ing and installing rear wheel

2x cross-head bits

1x plain screwdriver bit

3 3/8" adapter for socket-

head screws, w/f 22

Removing and installing front

axle

4 Electric torch

LED bulb

5 Socket

3x open-ended spanner, for

example for connecting and

disconnecting leads to battery

terminals

6 Adapter

Adapter for 1/4" bits

9x12 mm and 3/8" swivel ad-

apters

Engine oil

Checking engine oil level

The engine can seize if the

oil level is low, and this can

lead to accidents.

Always make sure that the oil

level is correct.

Oil can collect in the sump

if the motorcycle is out of

use for an extended period of

time; this oil has to be pumped

into the oil tank before the level

is read. The engine oil must be

at operating temperature to do

this. Checking the oil level with

the engine cold or after no more

than a short ride will lead to mis-

interpretation; this in turn, means

that the engine will be operated

with the incorrect quantity of oil.

In order to ensure that the en-

gine oil level is read correctly,

check the oil level only after a

lengthy trip.

Make sure the engine is at op-

erating temperature and hold

the motorcycle upright.

with OA Centre stand:

Check that the engine is at op-

erating temperature, make sure

the ground is level and firm

and place the motorcycle on its

centre stand.

Allow the engine to idle for one

minute.

8

99

z

Maintenance

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 167 168

Kommentare zu diesen Handbüchern

Keine Kommentare