ISTA/P - User Documentation Page 10
Vehicle Programming in Service Applications of 131
Copyright © BMW AG/ISTA/P - User Documentation
Version V2.31.0/August 08
ICOM C
Index Description
6 Connector for OBD port
7 Diagnosis head connector
Connecting ICOM to OBD socket
Plug the OBD connector on the ICOM A into the OBD socket on the vehicle. Then
connect the ICOM A to the workshop network using the network connector. The OBD
connector on the ICOM A can be angled, allowing it to be adjusted for OBD sockets at
different installation locations in the vehicle.
Using ICOM at MOST direct access port
Also use the ICOM B module to connect the ICOM to the vehicle MOST direct access
port. For this purpose, connect the USB ports of ICOM A and of ICOM B with the USB
cable. Then connect ICOM A to the workshop network via the network connector.
Connect ICOM B via the MOST connector to the MOST direct access port of the vehicle
and plug the OBD connector of ICOM A into the OBD socket on the vehicle.
Repeat the procedure if the MOST connection or ICOM is not recognized.
Kommentare zu diesen Handbüchern