BMW Z4 Bedienungshandbuch PDF herunterladen (Seite 99)

Reference At a glanceControlsDriving tipsMobility

97

Pull the ends of the rubber bands upward and

out of the fasteners.

Always observe all legal regulations

requiring a warning triangle to be carried

in the vehicle.<

First-aid kit*

The first-aid kit is located beneath the passen-

ger seat.

To open

Pull the handle and fold the cover downward.

To close

Fold the cover up and engage the catch.

Some of the articles in the first-aid kit

have a limited period of use before expira-

tion. For this reason, check the expiration dates

of each of the items regularly, and replace any

with passed dates. These items can be pur-

chased in any drugstore or pharmacy.

Always observe all legal regulations requiring a

first-aid kit to be carried in the vehicle.<

Jump-starting

When your battery is discharged you can use

two jumper cables to start your vehicle with

power from the battery in a second vehicle. You

can also use the same method to help start

another vehicle. Always use jumper cables with

fully insulated handles on the terminal clamps.

Do not touch components carrying cur-

rent on a running engine. Contact with

these components can cause fatal injury. Care-

fully observe the following instructions to avoid

personal injury and/or damage to one or both

vehicles.<

Preparations

1. Check whether the battery of the support

vehicle has 12 volts and approximately the

same capacity – measured in Ah. This infor-

mation is provided on the battery

2. Stop the engine of the support vehicle

3. Switch off all electrical accessories in both

vehicles.

Make absolutely certain that there is no

contact between the bodywork of the two

vehicles: short circuit hazard.<

Connecting jumper cables

Always adhere to this sequence when

connecting jumper cables; failure to

observe this procedure can lead to sparks at the

battery terminals and pose an injury hazard.<

The auxiliary jump-starting terminal located in

your BMW's engine compartment acts as the

positive battery terminal. Refer to the engine

compartment overview on page 85. The cover

is marked with a +.

1. Open the cover of the BMW auxiliary jump-

starting terminal. Do so by pulling the tab

2. With the + jumper cable, connect the posi-

tive terminal of the drained battery and the

positive terminal of the support battery.

To do this:

Connect one terminal clamp to the positive

terminal of the battery or to an auxiliary

jump-starting terminal of the support vehi-

cle.

Connect the second terminal clamp to the

Online Edition for Part-No. 01 41 0 158 704 - © 10/04 BMW AG

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare