BMW SERIE 7 2000 Bedienungshandbuch PDF herunterladen (Seite 114)

112n

BMW Universal Transmitter*

The concept

The BMW Universal Transmitter re-

places up to three hand-held transmit-

ters of different devices such as ga-

rage-door openers, alarm systems, or

door locking systems. The BMW Uni-

versal Transmitter recognizes and

"learns" the transmitted signal of each

of the original hand-held transmitters.

The signal of an original hand-held

transmitter can be programmed on one

of the three channel keys. Following

that, each of the devices can be actu-

ated with the appropriately-program-

med channel key. Transmission of the

signal is signaled by the indicator lamp.

If the vehicle is sold, the memory of the

channel keys should be cleared as de-

scribed on page 114.

During programming and before

every remote actuation of a pro-

grammed device by the BMW Universal

Transmitter, check to be sure that there

are no persons, animals or objects

within the actuation range of the device

in order to prevent possible injuries or

damage. Also, comply with the safety

precautions of the original hand-held

transmitter.<

To Canadian residents:

During programming, your hand-

held transmitter may automatically stop

transmitting after two seconds, which

may not be long enough to program the

BMW Universal Transmitter. If you are

programming from one of these hand-

held transmitters, the Universal Trans-

mitter's light may begin to flash in a se-

ries of double-blinks. If this occurs,

continue to hold the button on the Uni-

versal Transmitter while you reactivate

your hand-held transmitter. You may

have to repeat this function several

times while programming.<

Before programming, read the

"User information" section on

page 114.<

Original hand-held transmitter

If this symbol is present on the

packaging or in the instructions

of the original hand-held trans-

mitter, it may be assumed that this

hand-held transmitter is compatible

with the BMW Universal Transmitter.

Checking for the conversion code

To determine whether the original

hand-held transmitter is provided with a

conversion-code system, you may ei-

ther read the instructions for the origi-

nal hand-held transmitter or program a

channel key as described on page 113

(left-hand column under "Program-

ming").

Then press and hold the programmed

channel key of the BMW Universal

Transmitter. If the indicator lamp of the

BMW Universal Transmitter flashes for

two seconds and then comes on

steadily, the original hand-held trans-

mitter is provided with a conversion-

code system. With a conversion-code

system, program the channel keys as

described on page 113 (right-hand col-

umn under "Programming a hand-held

transmitter with conversion code").

If you have additional questions,

please consult your BMW center

or call 1-800-355-3515.<

Online Edition for Part No. 01 41 0 004 597 - © 08/99 BMW AG

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 216 217

Kommentare zu diesen Handbüchern

Keine Kommentare