BMW M6 Bedienungshandbuch PDF herunterladen (Seite 87)

Controls

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

change. This change is detected and signaled

as a flat tire.

Functional requirement

To ensure the reliable signaling of a flat tire, the

system must be initialized at the correct tire

inflation pressure.

The initialization must be repeated after

every correction of the tire inflation pres-

sure and after every tire or wheel change.<

System limits

The Flat Tire Monitor cannot indicate

sudden severe tire damage caused by

outside factors and does not detect a natural,

even pressure drop in all four tires.<

In the following situations, the system could be

delayed or malfunction:

> System has not been initialized

> Driving on snow-covered or slippery roads

> Sporty driving style: slip in the drive wheels,

high lateral acceleration

> Driving with snow chains

Initializing system

The initialization finishes during driving,

which can be interrupted at any time.

When driving resumes, the initialization is auto-

matically continued.

Do not initialize the system when driving with

snow chains

With Sequential Manual Transmission via the

button in the center console:

1. Start the engine, but do not start driving.

2. Press the button at least 4 seconds, how-

ever not longer than 2 minutes. After

releasing the button, the warning lamp in

the instrument cluster lights up yellow for a

few seconds. Warning lamp, refer to Indica-

tion of a flat tire. The message "Initializing

FTM..." appears on the Control Display for a

few seconds.

3. Start to drive. The initialization finishes dur-

ing driving without feedback.

Via iDrive, for explanation of principle, refer to

page 16:

1. Press the button.

This opens the start menu.

2. Press the controller to open the menu.

3. Turn the controller until "Settings" is

selected and press the controller.

4. Select "Vehicle / Tires" and press the con-

troller.

5. Change to upper field if necessary. Turn the

controller until "FTM" is selected and press

the controller.

6. Start the engine, but do not start driving.

7. Select "Reset" and press the controller.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW M6 Bedienungshandbuch Seite 87

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW M6