BMW M3 Bedienungshandbuch PDF herunterladen (Seite 70)

70

Indicator lamp

The gearbox indicator lamp in

the instrument cluster goes out

after the engine is started.

> If it does not go out, or if it lights up

during driving, a malfunction has

occurred. The available functions

may be limited under certain circum-

stances.

Drive carefully and with the Dynamic

Stability Control (DSC) activated.

Have the system checked by the

nearest BMW center

> If the indicator lamp flashes while

driving, the system is overloaded.

Avoid high loads until the indicator

lamp goes out again permanently.

Shift lights

To achieve the best possible vehicle

acceleration with a sporty driving style

in the sequential mode, shift lights in

the instrument cluster indicate the opti-

mum shifting point shortly before the

maximum engine speed is reached.

1. When the maximum engine speed is

approached, yellow indicator fields –

shift lights – in the tachometer light

up consecutively to indicate the

approaching upshift time

2. Shift at the latest when the last indi-

cator field lights up red.

Tire replacement, snow chains

Following a tire or wheel change and

after mounting or removing snow

chains, the slip recognition of the

SMG Drivelogic must become familiar

with the changed condition.

Reinitialize the system afterwards.

1. Move the selector lever into

position N on a straight stretch of

road at a speed of over 20 mph /

30 km/h

2. Pull both shift paddles for approx.

2 seconds.

If you do not carry out the initialization,

the system automatically learns the

changed condition gradually during

driving. This can become apparent due

to brief opening and closing of the

clutch.

Sequential M gearbox with Drivelogic*

Online Edition for Part-No. 01 41 0 158 512 - © 09/04 BMW AG

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 169 170

Kommentare zu diesen Handbüchern

Keine Kommentare