Bmw M3 Coupe 2006 Bedienungsanleitung PDF herunterladen (Seite 83)

83

Activating M Track mode

Tap the button; the indicator lamp

comes on and stays on.

Deactivating M Track mode

Press the button again; the indicator

lamp goes out.

To deactivate DSC

Press the DSC button; the DSC indica-

tor lamp lights up continuously. DSC

and M Track mode are off.

When better traction is required, it is

beneficial to deactivate the system in

the following situations:

> When rocking the vehicle or starting

off in deep snow or on loose surfaces

> When driving with snow chains.

To maintain vehicle stability,

always drive with the system

switched on whenever possible.<

To reactivate DSC

Press the DSC button again; the indica-

tor lamp goes out.

Flat Tire Monitor

The concept

As you drive, the Flat Tire Monitor

keeps track of pressure levels in all four

tires. The system alerts you whenever

the inflation pressure of a tire falls sig-

nificantly below the pressure of another

tire.

In the event of tire pressure loss, the

rolling radius of the tire changes, and

thereby the rotational speed of the

wheel. This change is detected, and a

flat tire warning is issued to the driver.

Functional requirements

To ensure a reliable flat tire warning,

the system must be initialized with the

correct tire inflation pressures.

Initialize the system immediately

after you have corrected a tire

inflation pressure, or changed the tire

or wheel.<

System limitations

The Flat Tire Monitor cannot pro-

vide you with advance warning of

sudden and severe tire damage caused

by external factors and does not detect

the balanced and very gradual pressure

loss that takes place in all four tires

over an extended period of time.<

Dynamic Stability Control (DSC)

OverviewControlsMaintenanceRepairsDataIndex

Online Edition for Part-No. 01 41 0 158 512 - © 09/04 BMW AG

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 169 170

Kommentare zu diesen Handbüchern

Keine Kommentare