BMW 740Ld Bedienungshandbuch PDF herunterladen (Seite 222)

4. Insert the sealant container on the com‐

pressor housing in an upright position.

5. Screw the filling hose of the sealant con‐

tainer onto the tire valve of the defective

wheel.

6. With the compressor switched off, insert

the plug into the power socket inside the

vehicle.

7. With the ignition turned on or the engine

running, reel on the compressor.

Switch off the compressor after 10 mi‐

nutes

Do not allow the compressor to run longer than

10 minutes; otherwise, the device will overheat

and may be damaged.◀

Let the compressor run for approx. 3 to 8 mi‐

nutes to fill the tire with sealant and achieve a

tire inflation pressure of approx. 2.5 bar.

While the tire is being filled with sealant, the

tire inflation pressure may sporadically reach

approx. 5 bar. Do not reel off the compressor at

this point.

If a tire inflation pressure of 2 bar is not

reached:

Switch off the compressor.

2. Unscrew the filling hose from the wheel.

3. Drive 33 ft/10 m forward and back to dis‐

tribute the sealant in the tire.

4. Inflate the tire again using the compressor.

If a tire inflation pressure of 2 bar cannot be

reached, contact your service center.

Stowing the Mobility System

Unscrew the filling hose of the sealant con‐

tainer from the wheel.

2. Unscrew the connection hose of the com‐

pressor from the sealant container.

3. Connect the filling hose of the sealant con‐

tainer previously connected to the tire

valve with the available connector on the

sealant container.

Seite 218

Mobility Wheels and tires

218

Online Edition for Part no. 01 40 2 954 177 - II/15

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 267 268

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 740Ld Bedienungshandbuch Seite 222

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW 740Ld