BMW 528I Bedienungshandbuch PDF herunterladen (Seite 110)

Lamps

108

Lamps

Parking lamps/low beams

0 Lights off and daytime running lamps

*

1 Parking lamps and daytime running lamps

*

2 Low beams and welcome lamps

3 Automatic headlamp control

*

, daytime run-

ning lamps

*

, welcome lamps, Adaptive

Head Light

*

and high-beam assistant

*

If you open the driver's door with the ignition

switched off, the exterior lighting is automati-

cally switched off when the light switch is in

position 0, 2 or 3.

Parking lamps

In switch position 1, the front, rear and side

vehicle lighting is switched on. You can use the

parking lamps for parking.

The parking lamps drain the battery. Do

not leave them switched on for long peri-

ods of time, otherwise it may no longer be pos-

sible to start the engine. It is preferable to

switch on the roadside parking lamps on one

side, refer to page 110.<

Low beams

The low beams light up when the light switch is

in position 2 and the ignition is on.

Automatic headlamp control*

In switch position 3, the system activates the

low beams and switches them on or off in

response to changes in ambient light condi-

tions, for instance, in a tunnel, at dawn and dusk

and in case of precipitation. Adaptive Head

Light

*

is active. The LED next to the symbol

lights up when the low beams are on. You can

activate the daytime running lamps, refer to

page 109. In the situations named above, the

system then automatically switches over to the

low beams.

A blue sky with the sun low on the horizon can

cause the lights to be switched on.

The low beams remain switched on inde-

pendent of the ambient lighting condi-

tions when you switch on the fog lamps

*

.<

The automatic headlamp control cannot

serve as a substitute for your personal

judgment in determining when the lamps

should be switched on in response to ambient

lighting conditions. For example, the sensors

cannot detect fog of hazy weather. To avoid

safety risks, you should always switch on the

low beams manually under these conditions.<

Welcome lamps

If you leave the light switch in position 2 or 3

when parking the vehicle, then when you unlock

the vehicle, the parking lamps and interior light-

ing remain illuminated for a brief time.

Activating/deactivating welcome

lamps

iDrive, for operating principle refer to page 16.

1. Press the button.

This opens the start menu.

2. Press the controller to open the menu.

3. Select "Settings" and press the controller.

4. Select "Vehicle / Tires" and press the con-

troller.

Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 287 288

Kommentare zu diesen Handbüchern

Keine Kommentare