Bmw 528I XDRIVE Bedienungsanleitung PDF herunterladen (Seite 120)

Practical interior accessories

118

Partition net

Do not allow the partition net to snap

back, otherwise there is a risk of injury

and the partition net may be damaged.<

With normal cargo bay

Pull the partition net out of the case by the loop.

Grip the bar on both ends and insert it into the

retaining fixtures, arrow 1. This is best carried

out from the rear seat.

When you no longer require the partition net,

grip both ends of the bar and take it out of the

retaining fixtures, arrow 2. Then slowly allow the

partition net to glide into the case.

With an expanded cargo bay

1. Fold down both rear backrests, refer to

Expanding cargo bay.

2. Use the buttons to unlatch the casing on

both sides, arrow 1.

3. Pull the casing out backwards, arrow 2,

without tilting it.

4. Push the case into the guides on the backs

of the backrests.

5. Carefully pull out the partition net and insert

it in the front brackets as described in With

normal cargo bay. This is best carried out

from the front seat.

To restore the original state, proceed in the

reverse order. Finally, lay the case in the two

side brackets and then press forward until it

engages. The red warning indicator disappears

in the recess when the catch is engaged. Check

whether the case is properly locked in place by

pulling it with a sudden movement.

Compartment in floor

Automatic luggage compartment roller cover:

the opened floor panel strikes against the lug-

gage compartment roller cover in the end posi-

tion. If necessary, unhook the luggage compart-

ment roller cover at the rear before opening the

floor panel.

To open, reach into the recess and swing up the

handle.

The floor panel flap can be locked.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 270 271

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw 528I XDRIVE Bedienungsanleitung Seite 120

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw 528I XDRIVE