BMW 335i Bedienungshandbuch PDF herunterladen (Seite 141)

Reference At a glanceControlsDriving tipsMobility

139

water penetration. Follow the operating instruc-

tions of the high-pressure washer.<

When using high-pressure washers, do

not spray against the sensors and cam-

eras, e.g. of the Park Distance Control or Rear

View Camera, for an extended period and main-

tain a distance of at least 1 ft/30 cm.<

Manual car wash

When washing the vehicle by hand, use large

quantities of water and car shampoo if neces-

sary. Clean the vehicle with a sponge or wash-

ing brush, applying light pressure only.

Before cleaning the windshield, deacti-

vate the rain sensor or switch off the igni-

tion to prevent unintentional activation of the

wipers.<

Observe local regulations pertaining to

washing vehicles by hand.<

Headlamps

Do not rub them dry and do not use abrasive or

corrosive cleaning agents.

Loosen dirt, e.g. insects, with shampoo or

insect remover and wash away with copious

quantities of water.

Thaw ice with a windshield deicer and do not

use an ice scraper.

Windows

Clean the inside and outside surfaces of the

windows and the mirrors with window cleaner.

Do not clean the mirrors with cleaners

containing quartz.<

Convertible: retractable hardtop

Proceed as you would in a normal car wash.

When you open a wet hardtop, water

drops may run into the cargo area. If nec-

essary, remove items from the cargo area

beforehand to avoid water stains or soiling.<

Paintwork care

Regular care contributes to value retention and

protects the paintwork against the long-term

effects of damaging substances.

Region-specific environmental influences can

damage the vehicle paintwork. Therefore, it is

important to adapt the frequency and scope of

car care accordingly.

Immediately remove aggressive materials such

as spilled fuel, oil, grease, brake fluid, tree sap or

bird droppings to prevent damage to the paint-

work.

Repairing paintwork damage

Immediately repair scratches or similar

damage, such as that caused by stones

hitting the vehicle, where necessary to prevent

rusting.<

BMW recommends having paintwork damage

repaired by a professional paint repair work-

shop according to BMW specifications using

original BMW paint materials.

Preservation

A preservation treatment is necessary when

water no longer beads off the clean paintwork

surface. Only use products for paintwork pres-

ervation that contain carnauba or synthetic

waxes.

Rubber seals

Treat only with water or rubber care products.

Do not use silicon-containing care prod-

ucts on rubber seals; otherwise, noise

and damage could occur.<

Chrome parts

Carefully clean vehicle parts such as the radia-

tor grill, door handles or window frames with

copious quantities of water and a shampoo

additive, especially when roads are treated with

deicing salt. For additional treatment, use a

chrome polish.

Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 187 188

Kommentare zu diesen Handbüchern

Keine Kommentare