Bmw 330XI Bedienungsanleitung PDF herunterladen (Seite 80)

80

Dynamic Stability Control (DSC)*

The concept

DSC maintains vehicle stability, even in

critical driving situations.

The DSC is operational every time you

start the engine.

DSC incorporates the Dynamic Traction

Control (DTC) and Cornering Brake

Control (CBC) functions.

Additional information on DSC is found

in the "Technology" brochure.

Indicator lamp

The indicator lamp in the instru-

ment cluster goes out shortly

after the ignition has been

switched on; refer to page 20.

> The indicator lamp flashes: DSC is

actively controlling drive torque and

braking intervention

> The indicator lamp stays lit: DSC has

been switched off with the button;

DTC and DBC are operational. DTC

control intervention is not indicated.

The indicator and the brake

warning lamps will remain on

continuously yellow:

The DSC, DTC and DBC have

been switched off manually or

there is a system malfunction.

The vehicle will remain completely

operational, however, without DSC. In

the event of a fault, please consult your

BMW center.

Indicator and warning lamps for

Canadian models.

Deactivating the DSC/activating

the DTC

Press the DSC button briefly; the indi-

cator lamp comes on and stays on.

DSC is deactivated; DTC is operational.

In the following rare situations, it may

prove useful to activate the DTC for a

brief period:

> When rocking the vehicle or starting

off in deep snow or on loose surfaces

> When driving on snow-covered

grades, in deep snow, or on a snow-

covered surface that has been

packed down from being driven on

> When driving with snow chains.

Online Edition for Part-No. 01 41 0 156 804 - © 09/02 BMW AG

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 165 166

Kommentare zu diesen Handbüchern

Keine Kommentare