BMW 325i Bedienungshandbuch PDF herunterladen (Seite 56)

Driving

One lever for all functions

1 Store and increase desired speed

2 Store and decrease desired speed

3 Deactivate system, refer to page 55

4 Resume stored desired speed and dis-

tance, refer to page 56

5 Select distance to vehicle driving ahead,

refer to page 55

Maintaining current speed

Briefly press the lever, arrow 1, or briefly pull it,

arrow 2, at a driving speed of more than approx.

20 mph or 30 km/h.

The car's current speed is stored and main-

tained. It is displayed in the speedometer and

briefly in the instrument cluster.

On uphill gradients, it may prove impossible to

maintain the set speed if current engine power

output is insufficient. If the engine braking

effect is insufficient on downhill slopes, the sys-

tem will brake the vehicle slightly.

Adjusting desired speed

Adjust your desired speed to the traffic

conditions and remain ready to brake at

all times, otherwise there is a risk of accident.

Great differences in speed to the vehicle ahead,

e.g. when quickly approaching a truck or when

another vehicle swerves into your lane, cannot

be compensated for by the system.<

Increasing in increments

Repeatedly tap the lever to the resistance point

or beyond, arrow 1, until the desired speed is

reached.

> Each time the lever is tapped to the resis-

tance point, the desired speed is increased

by approx. 1 mph or 1 km/h.

> Each time the lever is tapped beyond the

resistance point, the desired speed is

increased by up to 5 mph or 10 km/h until

the maximum speed of 110 mph or

180 km/h is achieved.

The speed then displayed is stored and

achieved on a clear road.

Increasing continuously

Repeatedly press the lever to the resistance

point or beyond, arrow 1, until the desired

speed is reached.

The speed then displayed is stored and

reached as soon as the road ahead of you is

clear.

Decreasing in increments

Repeatedly pull the lever to the resistance point

or beyond, arrow 2, until the desired speed is

reached.

> Each time the lever is pulled to the resis-

tance point, the desired speed is decreased

by approx. 1 mph or 1 km/h.

> Each time the lever is pulled beyond the

resistance point, the desired speed is

reduced by up to 5 mph or 10 km/h until the

minimum speed of 20 mph or 30 km/h is

achieved.

The speed then displayed is stored and

achieved on a clear road.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 165 166

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 325i Bedienungshandbuch Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW 325i