BMW 2015 ActiveHybrid 5 Bedienungshandbuch PDF herunterladen (Seite 78)

▷ When locking the vehicle, and when the

low beams are activated.

▷ Shortly before the battery is discharged

completely, so that the engine can still be

started. This function is only available

when the low beams are turned off.

▷ When opening and closing the driver door,

if the driver's safety belt is unbuckled and

the low beams are turned off.

▷ While the driver's safety belt is unbuckled

with driver's door open and low beams off.

The low beams switch to parking lights after

approx. 15 minutes of no use.

When the ignition is switched off automatically

by opening or closing the driver's door, un‐

buckling the driver's safety belt or by the auto‐

matic switching of the low beams to parking

lights, the radio-ready state remains active.

Drive readiness

When drive readiness is activated, the vehicle

is operational. Activated drive readiness is the

equivalent of a running engine in conventional

vehicles. Deactivated engine readiness is

equivalent to switching the ignition off.

Drive readiness in detail

The concept

The following are the different drive readiness

variants:

▷ Electric drive readiness, Silent Start, refer

to page 74

The vehicle is powered by the electric mo‐

tor.

▷ Starting the combustion engine, refer to

page 75

The vehicle is powered by the combustion

engine.

Hints

Awareness of vehicle reduced when

driven in electric mode

When driving in electric mode, note that due to

the lack of engine noise pedestrians and other

traffic might pay less attention to the vehicle

due to missing engine noises. Please take spe‐

cial care when parking or leaving a parking

space.◀

Do not leave the vehicle unattended

Do not leave the vehicle unattended with

drive readiness active; otherwise, it may pose a

risk.◀

Take the remote control with you

Take the remote control with you when

leaving the vehicle so that children, e.g., can‐

not start the engine.◀

Apply parking brake and further secure

the vehicle if needed.

Set the parking brake firmly when parking; oth‐

erwise, the vehicle could roll. On steep upward

and downward inclines, further secure the ve‐

hicle, e.g., by turning the steering wheel in the

direction of the curb.◀

Activating drive readiness

1.

Close the driver's door.

2. Depress the brake pedal.

3. Press the Start/Stop button.

Drive readiness is activated:

▷ Electric drive readiness, Silent Start or

▷ Starting the combustion engine.

Electric drive readiness, Silent Start

The vehicle is ready for driving without starting

the combustion engine.

Silent Start is possible if the requirements for

Electric driving, refer to page 76, are met.

Seite 74

Controls Driving

74

Online Edition for Part no. 01 40 2 954 366 - II/15

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 256 257

Kommentare zu diesen Handbüchern

Keine Kommentare