Bmw 2013 5 Series Bedienungsanleitung PDF herunterladen (Seite 95)

Adaptive light control

The concept

Adaptive light control is a variable headlamp

control system that enables dynamic illumina‐

tion of the road surface.

Depending on the steering angle and other pa‐

rameters, the light from the headlamp follows

the course of the road.

In tight curves, e.g., on mountainous roads or

when turning, an additional, corner-illuminating

lamp is switched on that lights up the inside of

the curve when the vehicle is moving below a

certain speed.

Activating

Switch position

with the ignition switched

on.

The turning lamps are automatically switched

on depending on the steering angle or the use

of turn signals.

To avoid blinding oncoming traffic, the Adaptive

Light Control does not swivel to the driver's side

when the vehicle is at a standstill.

When driving in reverse, only the turning lamp is

active.

Self-leveling headlights

The self-leveling headlights feature adapts the

light distribution to the contours of the road.

The light distribution is lowered on hilltops to

avoid blinding oncoming traffic and tilted in de‐

pressions to increase visibility.

Malfunction

A Check Control message is displayed.

Adaptive light control is malfunctioning or has

failed. Have the system checked as soon as pos‐

sible.

Headlamp range control

With halogen headlamps, the headlamp range of

the low beams can be manually adjusted for the

vehicle load to avoid blinding oncoming traffic.

The values following the slash apply to trailer

operation.

0 / 1 = 1 to 2 people without luggage.

1 / 1 = 5 people without luggage.

1 / 2 = 5 people with luggage.

2 / 2 = 1 person, full cargo area.

High-beam Assistant

The concept

When the low beams are switched on, this sys‐

tem automatically switches the high beams on

and off. The procedure is controlled by a sensor

on the front of the interior rearview mirror. The

assistant ensures that the high beams are

switched on whenever the traffic situation al‐

lows. The driver can intervene at any time and

switch the high beams on and off as usual.

Activating

Turn the light switch to or .

2. Press the button on the turn signal lever, ar‐

row.

The indicator lamp in the instrument

cluster lights up.

When the lights are switched on, the

high beams are switched on and off automati‐

cally.

Seite 95

Lamps Controls

Online Edition for Part no. 01 40 2 903 008 - 07 12 490

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 251 252

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw 2013 5 Series Bedienungsanleitung Seite 95

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw 2013 5 Series