Bmw 2012 5 Series Bedienungsanleitung PDF herunterladen (Seite 116)

Distance

Selecting a distance

Adjust the distance according to the traffic

and weather conditions; otherwise, there is the

danger of an accident occurring. Maintain the

prescribed safety distance.◀

Reduce distance

Press the button repeatedly until the

desired distance is set.

The selected distance, refer to page 117, is dis‐

played in the instrument cluster.

Increase distance

Press the button repeatedly until the

desired distance is set.

The selected distance, refer to page 117, is dis‐

played in the instrument cluster.

Calling up the desired speed and

distance

While driving

Press the button with the system

switched on.

In the following cases, the stored speed value is

deleted and cannot be called up again:

▷ When the system is switched off.

▷ When the ignition is switched off.

While standing

Before leaving the vehicle, secure it

against rolling.

Before leaving the vehicle with the engine run‐

ning, engage position P of the automatic trans‐

mission and apply the parking brake. Otherwise,

the vehicle may begin to roll.◀

The system brought the vehicle to a complete

standstill.

▷ Green mark in the speedometer during a

brief idle phase:

The vehicle ahead of you drives away while

the mark is green: your vehicle accelerates

without anything having to be done.

▷ Switch to orange of the mark in the speed‐

ometer after approx. 2 sec.:

The vehicle ahead of you drives away, while

the mark is orange: in order to accelerate,

briefly press the gas pedal or press the RES

button or SET button.

Rolling bars in the distance indicator mean that

the vehicle ahead of you has driven off.

You actively braked your vehicle to a halt by

pressing on the brake pedal and it is standing

behind another vehicle:

1.

Press the button to call up a stored

desired speed.

2. Release the brake pedal.

3. Press on the accelerator briefly, or press the

RES button or the rocker switch when the

vehicle ahead of you drives away.

Displays in the instrument cluster

Desired speed

▷ The marking lights up in

green: the system is active.

▷ The marking lights up in or‐

ange: the system has been

interrupted.

▷ The marking does not light up: the system is

switched off.

Brief status display

Selected desired speed.

If --- appears briefly on the display for Check

Control messages, it is possible that the system

Seite 116

Controls Driving comfort

116

Online Edition for Part no. 01 40 2 607 879 - 09 11 490

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 334 335

Kommentare zu diesen Handbüchern

Keine Kommentare