Bmw 2007 bmw 328i Bedienungsanleitung PDF herunterladen (Seite 283)

Daytime running lights

24-watt bulb, PW24W

1. If necessary, remove the high beam bulb

connector.

2. Remove the bulb holder.

3. Remove the bulb from the bulb holder.

4. To insert the new bulb, proceed in reverse

order of removal. During insertion, the bot‐

tom of the bulb holder must be facing down‐

ward. Make sure that the bulb holder snaps

into place.

5. Attach the high beam bulb connector.

6. Close the headlamp housing with the cap.

Make sure that the cap engages.

Xenon headlamps

Because of the long life of these bulbs, the like‐

lihood of failure is very low. Switching the lamps

on and off frequently shortens their life.

If a xenon bulb fails, switch on the front fog lamps

and continue the trip with great care. Comply

with local regulations.

Do not perform work/bulb replacement on

xenon headlamps

Have any work on the xenon lighting system, in‐

cluding bulb replacement, performed only by a

service center. Due to the high voltage present

in the system, there is the danger of fatal injuries

if work is carried out improperly.◀

For checking and adjusting headlamp aim,

please contact your BMW center.

Headlamps

1 Parking lamps/daytime running lights

2 Low beams/high beams/headlamp flasher

3 Turn signal

Low beams and high beams are designed with

xenon technology.

The parking lamps and daylight running lights

are made using LED technology.

Contact your service center in the event of a

malfunction.

Turn signal

Follow the General instructions on lamps and

bulbs, refer to page 279.

Seite 283

Replacing components Mobility

283

Online Edition for Part no. 01 40 2 608 633 - 11 09 490

1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 324 325

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw 2007 bmw 328i Bedienungsanleitung Seite 283

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw 2007 bmw 328i