Bmw 2006 bmw 325i Bedienungsanleitung PDF herunterladen (Seite 80)

80n

ASC+T

The concept

This system enhances driving stability

and traction, especially when you are

just starting off, accelerating or on

curves.

ASC+T recognizes the danger present

in traction loss and will increase driving

stability and traction by reducing the

engine's output, and if necessary, by

applying the brakes to the rear wheels.

ASC+T is available as soon as the

engine starts up.

Indicator lamp

The indicator lamp in the instru-

ment cluster goes out shortly

after you switch on the ignition.

Refer to pages 21, 22.

Indicator lamp flashes:

ASC+T controls the drive and braking

forces.

If the indicator lamp fails to go out after

the engine is started, or comes on

during normal driving and stays on:

There is a system malfunction or the

system was deactivated with the

button. Consequently, interventions to

increase driving stability (as described

in the preceding column) are not avail-

able. However, you can still drive the

vehicle perfectly well without ASC+T.

Please consult your BMW center in the

event of a malfunction, refer to

pages 21, 22.

Deactivating the ASC+T

Press the button; the indicator lamp

comes on and stays on.

The illustration shows the arrangement

of the buttons if the vehicle is fully

equipped. This may vary, depending on

the equipment actually installed.

In the following rare situations, it may

be advisable to deactivate the ASC+T

for a brief period:

> When rocking the vehicle or starting

off in deep snow or on loose

surfaces.

> When driving with snow chains.

Refer also to page 122.

To maintain vehicle stability,

always drive with the ASC+T

switched on whenever possible.<

460de312

Online Edition for Part No. 01 41 0 155 476 - © 09/00 BMW AG

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 210 211

Kommentare zu diesen Handbüchern

Keine Kommentare