BMW 135i Bedienungshandbuch PDF herunterladen (Seite 56)

Driving

54

Cruise control*

The concept

You can use the cruise control feature begin-

ning at approx. 20 mph/30 km/h. The car then

stores and maintains the speed that you specify

using the lever on the steering column.

Do not use cruise control when driving at

constant speed is prevented by adverse

conditions, e.g. winding roads, dense traffic or

poor road conditions due to, e.g. snow, rain, ice

or loose surfaces. Otherwise, you could lose

control of the vehicle and cause an accident as a

result.<

One lever for all functions

1 Storing and maintaining speed or accelerat-

ing

2 Storing and maintaining speed or deceler-

ating

3 Deactivating cruise control

4 Resuming a speed stored beforehand

Maintaining current speed

Tap the lever, arrow 1, or pull it briefly, arrow 2.

The car's current speed is stored and main-

tained. It is briefly displayed in the instrument

cluster.

If the engine braking power is insufficient on a

downhill slope, the set speed may be exceeded.

On uphill gradients, it may prove impossible to

maintain the set speed if engine power output is

insufficient.

Increasing speed

Repeatedly press the lever, arrow 1, until the

desired speed is reached.

Each time the lever is pressed lightly, the speed

is increased by approx. 1 mph/1 km/h.

Accelerating using the lever

Press the lever, arrow 1, until the desired speed

is reached.

The vehicle accelerates without pressure on

the accelerator pedal. The system stores and

maintains the speed.

Decreasing speed

Repeatedly pull the lever, arrow 2, until the

desired speed is reached.

The functions are the same as when the set

speed is increased or the vehicle is accelerated,

except that in this case the speed decreases.

Deactivating cruise control

Tap the lever upwards or downwards, arrow 3.

In addition, the system is automatically deacti-

vated:

> When you brake the vehicle

> When you depress the clutch of a manual

transmission or shift to neutral

> When you select the automatic transmis-

sion's neutral position N

> When the vehicle travels faster or slower

than the set speed for an extended period,

e.g. when the accelerator is depressed

> When you activate DTC or deactivate DSC

> When DSC is intervening

Resuming a speed stored beforehand

Press the button, arrow 4.

The last stored speed is resumed and main-

tained.

The stored speed is briefly displayed in the

instrument cluster.

The stored speed is cleared when the ignition is

switched off.

Online Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 813 - © 08/09 BMW AG

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 165 166

Kommentare zu diesen Handbüchern

Keine Kommentare