Bmw 128i Convertible 2011 Bedienungsanleitung PDF herunterladen (Seite 173)

171

EntertainmentReference At a glanceControlsDriving tipsCommunications NavigationMobility

> Bluetooth has been activated in the vehicle,

refer to page 172, and on the mobile phone.

> Depending on the mobile phone, certain

settings may be necessary on the mobile

phone, e.g. via the following menu items:

> Bluetooth switched on

> Connection must be allowed without

requiring further confirmation

> Reconnection

> Depending on the mobile phone type, the

power-saving mode setting, for example,

may result in a paired mobile phone not

being detected by the vehicle.

> For pairing purposes, define any 4 to 16-

digit number as a Bluetooth passkey,

e.g. 25081107. A long and complex number

offers the best protection against unautho-

rized access. This Bluetooth passkey is no

longer required after pairing is successful.

> The ignition is switched on.

Pair the mobile phone with the vehicle

only when the car is stationary, to avoid

endangering the car's occupants and other

road users by being distracted.<

Switch on ignition

1. Insert remote control all the way into the

ignition lock.

2. Switch on ignition without operating the

brake or clutch or pressing the start/stop

button.

Preparation via iDrive

3. "Telephone"

4. "Bluetooth (telephone)"

5. "Add new phone"

The Bluetooth name of the vehicle is dis-

played.

Preparation via the mobile phone

6. Further steps must be carried out with the

mobile phone and vary depending on the

model. Please refer to your mobile phone's

operating instructions, e.g. under the topics

of Searching for a Bluetooth device, Linking

or Pairing.

The Bluetooth name of the vehicle appears

on the mobile phone display.

7. Select the Bluetooth name of the vehicle on

the mobile phone display.

Pairing

Depending on your mobile phone, you will see

messages, first on the mobile phone display or

on the iDrive, requesting you to enter the same

Bluetooth passkey previously determined by

you.

8. Enter the Bluetooth passkey.

Depending on the mobile phone, you will

have approx. 30 seconds to enter your

Bluetooth passkey on the mobile phone

and the Control Display.

If the pairing was successful, the mobile phone

appears at the top of the list of mobile phones.

Following the initial pairing

> The mobile phone is detected/connected in

the vehicle within a short time if the engine

is running or the ignition is switched on.

> As soon as a mobile phone is detected by

the vehicle, the phone book entries stored

on the SIM card or on your mobile phone are

transmitted to the vehicle. This transmis-

Online Edition for Part no. 01 41 2 604 129 - © 02/10 BMW AG

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare