Bmw K 1100 LT/RS Bedienungsanleitung Seite 280

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 364
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 279
34.22
Removing and installing rear brake
caliper
Drain brake System.
Release bottom of suspension strut (1).
Detach suspensions strut from stud bolt.
Release brake line at brake caliper.
Disconnect ABS plug connection for sensor line.
Release brake caliper and carefully lift out.
Install in the reverse order of removal.
L Note:
Replace sealing rings of brake lines.
e Caution:
Ensure brake fluid does not come in contact with
painted parts of vehicle; brake fluid destroys the
paintwork.
Check ABS sensor spacing, if necessary readjust
with spacer plates.
Sensor spacing rear:
Up to 1996 MY .............................. 0.60 - 0.65 mm
................................................ (0.0236...0.0256 in)
From 1997 MY on .......................... 0.45 - 0.55 mm
................................................ (0.0177...0.0216 in)
Removing and installing rear brake
pads
Remove cap (2).
With the aid of a drift, drive out retaining pins (3)
from the wheel side.
Remove brake pads by pulling upward.
Install in the reverse order of removal.
Minimum brake pad thickness ....................1.5 mm
L Note:
Before installing the new brake pads, press back
pinion in brake caliper with the aid of the piston re-
setting tool (4), BMWNo.341500.
e Caution:
Carefully bleed brake system!
LT340140
1
3
2
34 1 500
LT340040
4
Seitenansicht 279
1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 363 364

Kommentare zu diesen Handbüchern

Keine Kommentare