BMW Z4 Bedienungsanleitung PDF herunterladen (Seite 25)

Complete Vehicle

Sequence:

1. Windows are lowered (window regulators are operated for 1.5 seconds if a closed win

dow is detected)

2. Soft-top is released from the windscreen top rail

3. Soft-top is folded backwards

4. Soft-top is stowed in stowage compartment and locked in place

5. Locking latches are retracted while pump is still running

6. Red LED goes out

7.Windows are raised (2 seconds after soft-top locks in position)

Raising the soft top

Sequence:

1. Windows are lowered (window regulators are operated for 1.5 seconds if a closed win

dow is detected)

2. Locking latches are extended and the stowage compartment catch is released

3. Soft-top is lifted out of stowage compartment

4. Soft-top is raised forwards

5. Locking latches engage in windscreen top rail

6. Locking mechanism is activated, moves to "LOCKED" position and stops on reaching

the limit switch

7. Red LED goes out

8.Windows are raised (2 seconds after soft-top locks in position)

Note:

If the soft-top button is released while the raising or lowering sequence is still in progress,

the movement of the soft-top comes to an immediate halt. Because the drive system does

not lock, the soft-top is then held only by the inherent resistance within the mechanism and

the hydraulic servo units.

Pressing the button again restarts the interrupted movement.

Easy Open function

An automatic sequence of operations for lowering the soft-top can be activated using the

ignition key in the driver’s door.

Sequence:

1. Insert ignition key in driver's door lock

2. Turn key anti-clockwise and hold. The basic module immediately sends the "Easy Open"

signal to the soft-top module.

3. The window regulators are then operated by the CVM control unit within 1.5 seconds.

Windows are lowered

4. Remaining sequence as for "Lowering the soft-top", steps 2 to 7

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

BMW Z4 Bedienungsanleitung Seite 25