Bmw Z4 sDrive35i 2010 Bedienungsanleitung PDF herunterladen (Seite 60)

Driving

58

> To shift down: press one of the shift pad-

dles forward, arrow 2.

Gears can be shifted using the shift paddles in

drive mode or in manual mode.

Gear change in manual mode:

When manual mode is active, refer to page 57,

gears can be changed using the shift paddles or

the selector lever.

Gear change in drive mode

The shift paddles can be used to change gears

in drive mode as well.

Afterwards, if the shift paddles are not used for

some time and vehicle acceleration is insuffi-

cient, the forward gears are changed again

automatically.

Launch Control

Launch Control enables you to drive off with an

optimal vehicle acceleration on a high grip road

surface.

Do not use Launch Control too often, as

the higher loads on the vehicle lead to

premature component wear.<

Launch Control is available when the engine is

at operating temperature, i.e., after driving con-

tinuously for at least 6 miles/10 km.

1. With the engine running, depress the brake

pedal with your left foot.

2. Activate the SPORT+ program of the

Dynamic Driving Control, refer to page 79.

3. With the vehicle stationary, activate manual

mode and select first gear.

4. Press the accelerator all the way down. The

engine speed when driving off is controlled.

A flag symbol appears in the instrument

cluster.

5. The vehicle accelerates when you release

the brake pedal. Keep the accelerator

pressed all the way down.

6. The transmission shifts up automatically as

long as the accelerator is pressed all the

way down.

Launch Control only becomes available again

after a certain distance has been driven.

Launch Control can only be used after the

break-in phase, refer to page 112.

To maintain driving stability, activate DSC

whenever possible.<

Manually releasing and engaging the

transmission lock

If a power failure occurs, e.g., if the battery

is discharged or disconnected or if there

is an electrical malfunction, the transmission

lock must be released manually; otherwise, the

rear wheels are blocked and the vehicle cannot

be towed.<

Release the transmission lock manually for tow-

ing only and set the parking brake beforehand

to prevent the vehicle from rolling. After parking

the vehicle, lock the transmission lock again

manually, refer to page 59.

Manual release

1. Unclip the sleeve of the selector lever.

2. Pull the sleeve up over the selector lever

until the sleeve is inside out.

3. Insert the Allen wrench from the onboard

vehicle tool kit, refer to page 212, into

the cap.

Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 253 254

Kommentare zu diesen Handbüchern

Keine Kommentare