Bmw Z4 Roadster 3.0si 2008 Bedienungsanleitung PDF herunterladen (Seite 52)

Everything under control

50

Setting the clock

1. Press button 2 for several seconds until the

hours are displayed and the colon flashes.

2. Press button 1 repeatedly until the required

hour is set.

3. Press button 2 to switch to the minutes dis-

play.

4. Press button 1 repeatedly until the required

minutes are set.

5. Press button 2 to confirm the time.

The set time of day is transferred to the car

radio display or appears in the instrument clus-

ter display.

Computer*

To view the information on the instrument clus-

ter display, press the onboard computer button

BC in the turn signal lever.

Each time you tap the onboard computer but-

ton, the following information is shown in the

specified order:

> Time

> Outside temperature

> Average fuel consumption

> Cruising range

> Average speed

With the ignition key in position 1 or higher, the

respective last active setting is displayed.

If you wish, you can have all the following

information displayed in another unit of

measure.<

Setting the time format

You can have the clock displayed in 12h or 24h

mode:

While the time display is active, press the

onboard computer button BC in the turn signal

lever until the display changes.

Changing unit of measure: °F/°C

While the outside temperature display is active,

press the onboard computer button BC in the

turn signal lever until the display changes.

Average fuel consumption

The average fuel consumption is calculated for

the time for which the engine has been running.

To reset the average fuel consumption display:

Press the onboard computer button BC in the

turn signal lever for approx. 2 seconds.

Cruising range

The computer bases its calculations of the

cruising range on the preceding driving style

and on the amount of fuel remaining in the tank.

Be sure to refuel as soon as possible once

your cruising range falls below 30 miles/

50 km, otherwise engine functions are not

ensured and damage can occur.<

Average speed

The average speed is calculated for the time for

which the engine has been running.

To reset the average speed display:

Press the onboard computer button BC in the

turn signal lever for approx. 2 seconds.

Online Edition for Part no. 01 41 0 014 500 - © 08/07 BMW AG

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 131 132

Kommentare zu diesen Handbüchern

Keine Kommentare