Bmw X6 xDrive50i 2008 Bedienungsanleitung PDF herunterladen (Seite 50)

Adjusting

48

The calibration is completed when the message

on the Control Display disappears. Should this

message continue to be displayed, repeat the

calibration. If the message does not disappear

even after repeated calibration, have the sys-

tem checked as soon as possible.

Never carry out calibration while the vehi-

cle is moving, as this can cause accidents.

Make sure that no persons or objects become

wedged during the calibration process, as this

can cause injuries or damage.<

Seat heating*

Front

The temperature setting progresses one step

through its control sequence each time you

press the button. The maximum temperature is

supplied when three LEDs are lit.

To switch off: press the button longer.

The temperature is reduced, if need be, down to

no heat in order to reduce the load on the bat-

tery. The LEDs remain lit.

Temperature distribution*

The heat output can be distributed variously in

the seat cushion and the backrest.

iDrive, for operating principle refer to page 16.

1. Open the start menu.

2. Move the controller to the left to open "Cli-

mate".

3. Select "Seat heater distribution" and press

the controller.

4. Move the controller to the left or right to

select "Driver" or "Passenger".

5. Turn the controller. The adjustment is

applied; the field can be changed.

Rear

Operation similar to front seat heating; without

temperature distribution.

Active seat ventilation* and

seat heating*

Front

1 Seat heating

2 Active seat ventilation

Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 287 288

Kommentare zu diesen Handbüchern

Keine Kommentare