BMW X5 Bedienungshandbuch PDF herunterladen (Seite 150)

If active, the displayed speed is stored and the

vehicle reaches the stored speed if the road is

clear.

▷ Each time the rocker switch is pressed to

the point of resistance, the desired speed

increases or decreases by approx.

1 mph/1 km/h.

▷ Each time the rocker switch is pressed

past the point of resistance, the desired

speed increases or decreases by a maxi‐

mum of 5 mph/10 km/h.

The maximum speed that can be set de‐

pends on the vehicle.

▷ Pressing the rocker switch to the resist‐

ance point and holding it accelerates or de‐

celerates the vehicle without requiring

pressure on the accelerator pedal. After

the rocker switch is released, the vehicle

maintains its final speed. Pressing the

switch beyond the resistance point causes

the vehicle to accelerate more rapidly.

Resuming the desired speed

Press the button.

The stored speed is reached and maintained.

Displays in the instrument cluster

Indicator lamp

Depending on how the vehicle is equip‐

ped, the indicator lamp in the instru‐

ment cluster indicates whether the sys‐

tem is switched on.

Desired speed

▷ The marking lights up green:

the system is active.

▷ The marking lights up or‐

ange: the system has been

interrupted.

▷ The marking does not light up: the system

is switched off.

Brief status display

Selected desired speed.

If --- appears briefly on the display for Check

Control messages, it is possible that the sys‐

tem requirements for operation are currently

not met.

PDC Park Distance Control

The concept

PDC supports you when parking. Objects that

you are approaching slowly in front of or be‐

hind your vehicle are indicated by:

▷ Signal tones.

▷ Visual display.

General information

Measurements are made by ultrasound sen‐

sors in the bumpers.

The range, depending on the environment, is

approx. 6 ft/2 m.

An acoustic warning is first given:

▷ By the front sensors and the two rear cor‐

ner sensors at approx. 24 in/60 cm.

▷ By the rear middle sensors at approx.

5 ft/1.50 m.

To ensure full operability:

▷ Do not cover sensors, e.g., by stickers, bi‐

cycle racks and the like.

▷ Keep the sensors clean and free of ice.

▷ When using high-pressure washers, do not

spray the sensors for long periods and

maintain a distance of at least 12 in/30 cm.

Seite 150

Controls Driving comfort

150

Online Edition for Part no. 01 40 2 926 740 - X/13

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 264 265

Kommentare zu diesen Handbüchern

Keine Kommentare