Bmw M3 Sedan 2008 Bedienungsanleitung PDF herunterladen (Seite 126)

Replacing components

124

4. Adjust the tire inflation pressure to 29 psi/

200 kPa. With the ignition switched on, pro-

ceed as follows:

> To increase the inflation pressure:

Switch on the compressor, position I. To

check the current inflation pressure set-

ting, briefly switch off the compressor.

Do not let the compressor run for

more than 10 minutes, otherwise the

device will overheat and may be dam-

aged.<

> To reduce the inflation pressure: turn

screw 8 on the pressure gauge.

If the inflation pressure is not maintained,

drive the vehicle a second time, refer to

Distributing the sealant. Then repeat steps 1 to

Use of the M Mobility System may be ineffec-

tual for tire damage larger than approx. 0.16 in/

4 mm. Please contact the nearest BMW center,

refer to page 126, or a workshop that works

according to BMW repair procedures with cor-

respondingly trained personnel if the tire can-

not be made roadworthy with the M Mobility

System.<

The tire inflation pressure must be at least

29 psi/200 kPa. If it is not, do not continue

driving.<

Continuing your trip

Do not exceed the maximum allowable

speed of 50 mph/80 km/h to avoid the risk

of an accident.<

Reinitialize the Flat Tire Monitor, refer to

page 64 for more information.

Have the faulty tire and the sealant bottle of the

M Mobility System replaced as soon as possi-

ble.<

Changing wheels

The tools for changing wheels are avail-

able as optional accessories from your

BMW center.<

Jack mounting points

The jacking points are at the positions shown in

the illustration.

Vehicle battery

Battery care

The battery is 100% maintenance-free, the

electrolyte will last for the life of the battery

when the vehicle is operated in a temperate cli-

mate. Your BMW center will be glad to advise in

all matters concerning the battery.

Charging the battery

Only charge the battery in the vehicle via the

terminals in the engine compartment with the

engine off. Connections, refer to Jump starting

on page 127.

Disposal

Have old batteries disposed of by your

BMW center or hand them in to a recy-

cling center. Maintain the battery in an upright

position for transport and storage. Always

secure the battery against tipping over during

transport.<

Power failure

After a temporary power loss, the functioning of

some equipment may be limited and require

reinitialization. Individual settings may likewise

have been lost and will have to be programmed:

> Time and date

These values must be updated, refer to

page 59.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 159 160

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw M3 Sedan 2008 Bedienungsanleitung Seite 126

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw M3 Sedan 2008