BMW M3 CONVERTIBLE 2004 Bedienungshandbuch PDF herunterladen (Seite 143)

143

4. Make sure that the screw on the rear

of the pressure gauge 3 is tightened

down. Turn on the M Mobility sys-

tem, position I, refer to illustration,

and allow minutes to elapse, to let

the sealant flow in. It does not matter

afterward, what the tire's inflation

pressure is

5. Turn the system off.

Disconnect the connector hose from

the sealant container and the wheel

valve. Stow the M Mobility system in

the luggage compartment.

Distributing the sealant

Right afterward, drive at least

1 1/4 miles / 2 km, so that the liquid

sealant distributes evenly throughout

the inside of the tire.

Do not exceed a maximum speed

of 40 mph / 60 km/h. If possible,

keep the vehicle speed above 10 mph /

20 km/h.

Stop in a suitable spot.<

Inflating tire to correct pressure

1. Take out the hose with the pressure

gauge and screw it onto the valve.

Take the plug out and plug it into the

cigarette lighter socket in the pas-

senger compartment

2. Reset the air pressure to

29 psi/200 kilopascal, and:

> Increase tire pressure: switch on

the M Mobility System, position I.

Switch off the unit briefly to check

the current tire pressure

> Decrease tire pressure: turn the

screw on the back of the manome-

ter, a valve located there will open

Repairing a flat tire

OverviewControlsMaintenanceRepairsDataIndex

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 173 174

Keine Kommentare

BMW M3 CONVERTIBLE 2004 Bedienungshandbuch Seite 143