Bmw ActiveHybrid 750Li 2011 Bedienungsanleitung PDF herunterladen (Seite 237)

your service center if you are unfamiliar with

them or they are not described here.

You can obtain a selection of replacement bulbs

at your service center.

Danger of burns

Only change bulbs when they are cool;

otherwise, there is the danger of getting

burned.◀

Working on the lighting system

When working on the lighting system, you

should always switch off the lights affected to

prevent short circuits.

To avoid possible injury or equipment damage

when replacing bulbs, observe any instructions

provided by the bulb manufacturer.◀

Do not touch the bulbs

Do not touch the glass of new bulbs with

your bare hands, as even minute amounts of

contamination will burn into the bulb's surface

and reduce its service life.

Use a clean tissue, cloth or something similar, or

hold the bulb by its base.◀

Light-emitting diodes (LEDs)

Light-emitting diodes installed behind a cover

serve as the light source for controls, display el‐

ements and other equipment.

These light-emitting diodes, which are related

to conventional lasers, are officially designated

as Class 1 light-emitting diodes.

Do not remove the covers

Do not remove the covers, and never stare

into the unfiltered light for several hours; other‐

wise, irritation of the retina could result.◀

Headlamp glass

Condensation can form on the inside of the ex‐

ternal lamps in cool or humid weather. When the

light is switched on, the condensation evapo‐

rates after a short time. The headlamp glasses

do not need to be changed.

If there is a large amount of moisture, e.g., water

droplets form in the lamp, have it checked by

your service center.

Front lamps, bulb replacement

At a glance

1 Adaptive light control

2 Parking lamp, daytime running lights*

3 Low beams/high beams

4 Turn signal

Xenon headlamps

Because of the long life of these bulbs, the like‐

lihood of failure is very low. Switching the lamps

on and off frequently shortens their life.

If a xenon bulb fails, switch on the front fog lamps

and continue the trip with great care. Comply

with local regulations.

Do not perform work/bulb replacement on

xenon headlamps

Have any work on the xenon lighting system, in‐

cluding bulb replacement, performed only by a

service center.

Due to the high voltage present in the system,

there is the danger of fatal injuries if work is car‐

ried out improperly.◀

For checking and adjusting headlamp aim,

please contact your BMW center.

Turn signals, incl. side indicators

Follow the general instructions on lamps and

bulbs, refer to page 236.

These lamps are made using LED technology.

Please contact your service center in the event

of a malfunction.

Seite 237

237

Online Edition for Part no. 01 41 2 603 958 - 03 10 500

Reference Mobility Communication Entertainment Navigation Driving tips Controls At a glance

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 279 280

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw ActiveHybrid 750Li 2011 Bedienungsanleitung Seite 237

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw ActiveHybrid 750Li 2011