Bmw 650i Convertible 2008 Bedienungsanleitung PDF herunterladen (Seite 91)

Controls

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

Dynamic Drive*

The concept

Dynamic Drive minimizes body roll and opti-

mizes vehicle stability during cornering and

evasive maneuvers.

Dynamic Drive is based on active stabilizers on

the front and rear axles. Suspension compli-

ance adapts to suit driving conditions, varying

from performance-oriented during cornering to

smooth and comfort-oriented when the vehicle

is proceeding in a straight line. During vehicle

operation, the system continuously runs

through closed-loop control cycles lasting only

fractions of a second.

The system assumes operational status each

time you start the engine.

FTM Flat Tire Monitor*

The concept

The Flat Tire Monitor detects a pressure loss in

one tire by comparing the speeds of the individ-

ual wheels during driving.

In the event of a pressure loss, there is a change

in the rolling circumference and therefore the

rotation speed of the corresponding wheel. The

system detects this change and reports it as a

flat tire.

Functional requirement

To ensure the reliable signaling of a flat tire, the

system must be initialized at the correct tire

inflation pressure.

The initialization must be repeated after

every correction of the tire inflation pres-

sure and after every tire or wheel change.<

System limits

The Flat Tire Monitor cannot indicate sudden

severe tire damage caused by outside factors

and does not detect a natural, even pressure

drop in all four tires.

In the following situations, the system could be

delayed or malfunction:

> System has not been initialized

> Driving on snow-covered or slippery roads

> Sporty driving style: slip in the drive wheels,

high lateral acceleration

> Driving with snow chains

Initializing system

The initialization finishes during driving,

which can be interrupted at any time.

When driving resumes, the initialization is auto-

matically continued.

Do not initialize the system when driving with

snow chains

iDrive, for operating principle refer to page 16.

1. Press the button.

This opens the start menu.

2. Press the controller to open the menu.

3. Turn the controller until "Settings" is

selected and press the controller.

4. Select "Vehicle / Tires" and press the con-

troller.

5. Change to upper field if necessary. Turn the

controller until "FTM" is selected and press

the controller.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 263 264

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw 650i Convertible 2008 Bedienungsanleitung Seite 91

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw 650i Convertible 2008