BMW 528I Bedienungshandbuch PDF herunterladen (Seite 258)

Oil types

Note

No oil additives

Oil

additives may lead to engine damage.◀

Approved oil types

Your service center can advise you on which en‐

gine oils have been approved by the manufac‐

turer of your vehicle.

The engine oil quality is critical for the life of the

engine.

Only use approved BMW High Performance oil.

Approved oils belong to the viscosity grades

SAE 0W-40, SAE 0W-30, SAE 5W-40 and SAE

5W-30.

Alternative oil types

If the approved engine oils are not available, up

to 1 US quart/liter of another oil with the follow‐

ing specification may be used.

API SM quality standards or higher.

Coolant

General information

Danger of burns from hot engine

Do not open the cooling system while the

engine is hot; otherwise, escaping coolant may

cause burns.◀

Suitable additives

Only

use suitable additives; otherwise, en‐

gine damage may occur. The additives are

harmful to your health.◀

Coolant consists of water and additives.

Not all commercially available additives are suit‐

able for your vehicle. Ask your service center for

suitable additives.

Coolant level

If there is no Min– and Max– mark in the filler

neck of the coolant reservoir, have the coolant

level checked if necessary by your service cen‐

ter and add coolant as needed.

Checking

1. Let the engine cool.

2. Turn the cap of the coolant reservoir slightly

counterclockwise to allow any excess pres‐

sure to dissipate, and then open it.

3. The coolant level is correct if it lies between

the minimum and maximum marks in the

filler neck.

4. If the coolant is low, slowly add coolant up to

the specified level; do not overfill.

Seite 258

258

Online Edition for Part no. 01 40 2 606 469 - 03 11 490

Engine oil

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 303 304

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 528I Bedienungshandbuch Seite 258

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW 528I