Bmw 525xi Sedan 2006 Bedienungsanleitung PDF herunterladen (Seite 88)

Technology for comfort, convenience and safety

iDrive, for explanation of principle, refer to

page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the

controller.

4. Change to upper field if necessary. Turn the

controller until "PDC" is selected and press

the controller.

5. Select "PDC display on" and press the con-

troller.

The PDC screen is activated.

The display appears on the Control Display as

soon as PDC is activated.

System limits

Even with PDC, final responsibility for

estimating the distance between the

vehicle and any obstructions always remains

with the driver. Even when sensors are pro-

vided, there is a blind spot in which objects can

no longer be detected. This applies especially

in those cases where the system approaches

the physical constraints of ultrasonic measure-

ment, as occurs with tow bars and trailer cou-

plings, and in the vicinity of thin or wedge-

shaped objects. Low objects already displayed,

e.g. a curb, can disappear from the detection

area of the sensors again before a continuous

tone sounds. Higher, protruding objects, e.g.

ledges, cannot be detected. Loud sources of

sound, inside and outside the vehicle, could

drown out the PDC signal tone.<

Driving stability control

systems

Your BMW is equipped with an extended array

of systems designed to enhance and maintain

vehicle stability under extreme conditions.

ABS Antilock Brake System

ABS prevents locking of the wheels during

braking. Safe steering response is maintained

even during full braking. Active safety is thus

increased.

The ABS is operational every time you start the

engine. Braking safely refer to page 125.

CBC Cornering Brake Control

When braking during curves or when braking

during a lane change, driving stability and steer-

ing response are improved further.

Electronic brake-force distribution

The system controls the brake pressure in the

rear wheels to ensure stable braking behavior.

DBC Dynamic Brake Control

When you apply the brakes rapidly, this system

automatically produces the maximum braking

force boost and thus helps to achieve the short-

est possible braking distance during full brak-

ing. This system exploits all of the benefits pro-

vided by ABS.

Do not reduce the pressure on the brake pedal

for the duration of the full braking.

DSC Dynamic Stability Control

DSC prevents traction loss in the driving wheels

when starting off and accelerating. DSC also

identifies unstable driving conditions, such as a

loss of traction at the rear of the vehicle or slid-

ing of the vehicle in its front wheels. In these

cases, DSC helps the vehicle maintain a safe

course within physical limits by reducing engine

output and through braking actions in the indi-

vidual wheels.

The laws of physics cannot be repealed,

even with DSC. An appropriate driving

style always remains the responsibility of the

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 258 259

Kommentare zu diesen Handbüchern

Keine Kommentare

Bmw 525xi Sedan 2006 Bedienungsanleitung Seite 88

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Bmw 525xi Sedan 2006