BMW 228i Bedienungshandbuch PDF herunterladen (Seite 186)

Accessing the daytime running lights, high

beams/headlamp flasher and parking

lamps

Follow the general instructions on lamps and

bulbs, refer to page 183.

1. Open the hood, refer to page 175.

2. Turn the cover counterclockwise and re‐

move.

Daytime running lights and high beams/

headlamp flasher

55-watt bulb, H15.

Turn the bulb counterclockwise and re‐

move.

2. Install the new bulb in reverse order of re‐

moval. Turn the clockwise bulb here until it

hits the stop.

3. Close the headlamp housing with the cap.

Make sure that the cap engages.

Parking lamps

6-watt bulb, H6W.

1. Tilt the bulb holder down and then up to

loosen it from the holder and remove.

2. Carefully remove the bulb from the bulb

holder.

3. To insert the new bulb, proceed in reverse

order of removal. Make sure you hear the

bulb holder engage.

4. Close the headlamp housing with the cap.

Xenon headlamps

Because of the long life of these bulbs, the

likelihood of failure is very low. Switching the

lamps on and off frequently shortens their life.

If a xenon bulb fails, switch on the front fog

lamps and continue the trip with great care.

Comply with local regulations.

Do not perform work/bulb replacement

on xenon headlamps

Have any work on the xenon lighting system,

including bulb replacement, performed only by

a service center. Due to the high voltage

present in the system, there is the danger of

fatal injuries if work is carried out improperly.◀

For checking and adjusting headlamp aim,

please contact your BMW center.

Seite 186

Mobility Replacing components

186

Online Edition for Part no. 01 40 2 924 974 - X/13

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 217 218

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 228i Bedienungshandbuch Seite 186

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW 228i