BMW 2007 5 Series Bedienungshandbuch PDF herunterladen (Seite 121)

Controls

119

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

You can operate the device when the engine is

running or when the ignition is switched on.

If the device fails to function even after

repeated programming, check whether

the original hand-held transmitter uses an alter-

nating-code system. To do so, either read the

instructions for the original hand-held transmit-

ter or hold down the programmed memory

button 1 of the integrated universal remote

control. If the LED 2 on the integrated universal

remote control flashes rapidly for a short time

and then remains lit for approx. 2 seconds, this

indicates that the original hand-held transmitter

uses an alternating-code system. In the case of

an alternating-code system, program the mem-

ory buttons 1 as described at Alternating-code

hand-held transmitters.<

Alternating-code hand-held

transmitters

To program the integrated universal remote

control, consult the operating instructions for

the equipment to be set. You will find informa-

tion there on the possibilities for synchroniza-

tion.

When programming hand-held transmitters

that employ an alternating code, please observe

the following supplementary instructions:

Programming will be easier with the aid of

a second person.<

1. Park your vehicle within the range of the

remote-controlled device.

2. Program the integrated universal remote

control as described above in the section

Fixed-code hand-held transmitters.

3. Locate the button on the receiver of the

device to be set, e.g. on the drive unit.

4. Press the button on the receiver of the

device to be set. After step 4, you have

approx. 30 seconds for step 5.

5. Press the programmed memory button 1

of the integrated universal remote control

three times.

The corresponding memory button 1 is now

programmed with the signal of the original

hand-held transmitter.

If you have any additional questions,

please contact your BMW center.<

Deleting stored programs

Press the left and right-hand memory button 1

for approx. 20 seconds until the LED 2 flashes

quickly:

All stored programs are deleted.

Individual programs cannot be deleted.

Sun blinds*

Sun blind for rear window

Press the button on the driver's door.

Sun blinds for rear side windows

Pull the loop of the roller sun blind and hook

onto bracket.

Glove compartment

Opening

Pull the handle. The light in the glove compart-

ment switches on.

Online Edition for Part no. 01 41 0 013 308 02/07 BMW AG

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 285 286

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 2007 5 Series Bedienungshandbuch Seite 121

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos BMW 2007 5 Series