BMW 128i Convertible Technical Information Seite 16

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 54
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 15
Maintenance Service Summary
The Condition Based Service (CBS) system will
determine the requirement for performing the
maintenance services described on this page
and ending on page 11 (excluding items noted as
“not shown in CBS”). These services may be
required either individually or in conjunction with
other maintenance services.
Maintenance services are performed as outlined
in this section, based on intervals of either time,
mileage or after performing a specified number
of previous services. These intervals correspond
to the latest information available when this
booklet was printed. Maintenance intervals are
subject to change with newer vehicles or may
also apply retroactively. Your BMW center will
advise and perform maintenance services as
required by the most recent information.
Standard operations
Maintenance work:
Verify Check Control messages.
Check indicator and warning lights.
Reset CBS display.
Inspect tires, adjust tire pressures and reset
Tire Pressure Monitor.
Engine oil
Maintenance work:
Change the engine oil and oil filter. We
recommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
After every 3rd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
Parking brake: Check function and pre-burnish
(pre-burnishing not applicable for 5, 6 Series
and Z4).
Microfilter (not shown in CBS)
Maintenance work:
Replace ventilation microfilter every 2 years
based on the vehicle production date, or in
connection with scheduled brake fluid change.
Front brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness; if
necessary, replace at extra charge.*
Rear brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness; if
necessary, replace at extra charge.*
Parking brake: Check condition, brake lining
thickness and function; if necessary, replace at
extra charge.*
*Unless covered by Maintenance Program.
Vehicle check
Maintenance work:
Check operation of horn, headlight flasher and
hazard warning flashers.
Check instrument and control lighting and
heater/air-conditioning blower.
Check lighting system: Turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, luggage area lights.
Safety belts: Check condition and function.
Check windshield wiper and washer jet
positions.
Tires: Check tread depth, wear pattern, outer
condition, inflation pressure. If necessary,
correct pressure.
Reset Tire Pressure Monitor.
Battery: Check state of charge (magic eye) and
charge if required.
Power steering reservoir: Check fluid level
(except Z4, 5 Series Sedans & all 6 Series).
Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
10
Seitenansicht 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare