BMW K 1600 GT Installationsanleitung PDF herunterladen

SARGENT CYCLE PRODUCTS, 1036 HUBBARD STREET, JACKSONVILLE, FL 32206 PH: (904) 354-4531 FAX: (904) 354-7979

BMW K 1600 GT / GTL SEAT INSTALLATION GUIDE

BMW K 1600 GT / GTL

SARGENT WORLD SPORT PERFORMANCE SEAT

INSTALLATION GUIDE

To protect your heated seats from wiring, lock or key damage, please read all

instructions carefully before beginning this installation.

Your new Sargent Seat has been designed to allow owners to use their OEM keys

on their new Sargent Seat. No additional keys to carry!

These instructions are for installing your OEM heat switch and lock set into your

new Sargent World Sport Seat.

Smooth protected work surface

Phillips screwdriver

Small slot/flathead screwdriver

Size T20 Torx driver (K 1600 GTL only)

Paper clip or similarly shaped tool (K 1600 GT only)

Your rear Sargent Seat is supplied to you with a zip tie holding the latch rod

and spring in place.

Do not remove zip tie until instructed to do so later in these instructions.

Do not attempt to use your key in the lock until these installation instructions

are complete and the zip tie has been removed. Any attempt to use your key in

the lock before the zip tie is removed may result in damage to your key and / or

the lock.

A test fit key is provided and allows for

installing and test riding the Sargent

World Sport Performance seat on the

motorcycle prior to changing the lock-

set. The key can be inserted into the open

lock bezel assembly to release the seat

once it has been locked in place, thus

eliminating the need for the OEM key for

seat removal. For limited use only.

K 1600 GTL owners

An additional, optional purchase of BMW part #77348520028 is recommended by

BMW for those GTL owners who wish to convert from the one-piece OEM seat to

the two-piece OEM seats. This kit is not required for mounting the seat or safe

operation, but rather it is made to hide a gap between the bike’s body work and

the seat. This kit will also will work with the Sargent two-piece seat.

Tools Required

WARNING

Note

Test Fit Key

Test Key

1 2 3 4 5 6 7