BMW 540i Spezifikationen PDF herunterladen (Seite 37)

Originally developed and published here by unknown author: http://members.cox.net/rlacm/IntakeIndex.htm

Recovered and published by BMW-Planet.com – May 2012

both visually and by touch!

- Carefully lower manifold onto engine block/heads.

- Install ten new mounting spacers, repositioning manifold slightly and as necessary

to attain correct alignment.

- Install ten 10mm hex nuts onto mounting studs, snugging each.

- Torque each nut to 22Nm, working from the center outward.

Vent Tube Installation

- Position a large flat-blade screwdriver on front edge of vent tube (accessible at

front/lower/left corner of intake manifold). Using fingers of right hand, position vent

tube such that it is aligned with fitting on rear cover of manifold. Using left hand and

screwdriver, gently pry vent tube backward onto rear cover fitting. Ensure o-ring

seal is not damaged during this procedure.

- Snap spring retainer onto rear end of vent tube and over rear cover fitting.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

Keine Kommentare

BMW 540i Spezifikationen Seite 37