BMW 540i Spezifikationen PDF herunterladen (Seite 34)

Originally developed and published here by unknown author: http://members.cox.net/rlacm/IntakeIndex.htm

Recovered and published by BMW-Planet.com – May 2012

INTAKE MANIFOLD SUBASSEMBLY

Vent Tube

- Carefully install new o-ring into front of vent tube, apply light coat of lubricant to o-ring,

then install vent tube into engine block. Push tube all the way toward front of engine. Dork

Alert! Make sure spring clip is removed from tube - if you leave it on tube it will be virtually

impossible to retrieve it once intake manifold is installed.

Vent Pipe

- Carefully install new o-ring onto front end of vent pipe; lightly lubricate.

- Working from rear of intake manifold, insert vent pipe into receiver hole in front of

manifold, using alignment lug. Push pipe forward until retainer clip snaps into place. Ensure

rear end of pipe is correctly positioned in manifold.

Rear Manifold Cover

- Install new seal into rear face of intake manifold.

- Install new vent pipe seal into center inside face of rear cover. Lubricate.

- Install new o-ring onto vent tube fitting at lower-left corner of cover (blue). Lubricate.

- Install new booster grommet (red/orange) into rear cover. Lubricate.- Verify that vent pipe

remains correctly positioned in rear of manifold, and install rear cover onto manifold (7x T-

30 bolts).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Keine Kommentare

BMW 540i Spezifikationen Seite 34