BMW 05 3 Bedienungshandbuch PDF herunterladen (Seite 96)

Controls

Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility

To set a compass zone, press the adjustment

button on the bottom of the interior rearview

mirror with a pointed object, such as a pen, for

approx. 3-4 seconds. The number of the com-

pass zone set is shown in the display.

To change the zone setting, press the adjust-

ment button repeatedly until the display shows

the number of the compass zone in which you

are currently driving:

The compass is operational again after approx.

10 seconds.

For information on the automatic dimming fea-

ture, refer to Interior and exterior mirrors, auto-

matic dimming feature, page 107.

Calibrating the digital compass

The digital compass must be calibrated in the

following situations:

> C or CAL is displayed.

> The compass shows the wrong cardinal

direction.

> The cardinal direction shown does not

change although the direction of travel

does.

> Not all cardinal directions are shown.

Procedure

1. Make sure that no large metal objects or

overhead power lines are in the vicinity of

your vehicle and that you have enough

space to drive in a circle.

2. Set the currently valid compass zone.

3. Press the adjustment button to call up C or

CAL. Then drive in one full circle at a speed

of no more than 4 mph or 7 km/h.

If calibration is successful, the C or CAL dis-

play is replaced by the cardinal directions.

Roller sun blinds*

Rear window blind

Tap the button in the center console to raise or

lower the roller sun blind.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 222 223

Keine Kommentare

BMW 05 3 Bedienungshandbuch Seite 96